Description
L298N Dual Motor Controller is based on the L298N heavy-duty dual H-bridge controller, which can be used to drive two DC motors at up to 2A each, with a voltage between 5 and 35V DC. The driver has a nice heatsink to keep the L298N cool and all driver lines are diode protected from back EMF.
L298N Dual Motor Controller can control both motor RPM and direction of rotation. The RPM is controlled using PWM input to ENA or ENB pins, while of rotation direction is controlled by supplying high and low signal to EN1-EN2 for the first motor or EN3-EN4 for second motor. There is also an onboard 5V regulator – so if you’re using between 7 and 12V DC to driver the motors, the module can supply your microcontroller with 5V DC. Remove the jumper if the supply is greater than 12V.
Features:
- Double H-bridge drive
- Chip: L298N (ST NEW)
- Logic voltage: 5V
- Drive voltage: 5V-35V
- Logic current: 0mA-36mA
- Drive current: 2A(MAX single bridge)
- Storage temperature: -20 to +135
- Max power: 25W
- Weight: 30g
- Size: 43*43*27mm ( approx 1.75″ x 1.75″ x 1″)
- Compatible with L297/L298 driver
Robo Admin T –
Cheap and Good product!