Accessories
-
1080P HD USB Camera
$9.81The 1080P HD USB Camera is a high-definition camera designed for use with computers and single-board computers such as the Raspberry Pi. It features a 1080P resolution sensor that captures clear, detailed video and images, making it ideal for a wide range of applications including video conferencing, surveillance, and video recording. The camera connects to your device via a standard USB interface and is easy to install and use. It is also compatible with a wide range of software and operating systems, including Windows, MacOS, and Linux, as well as popular computer vision libraries such as OpenCV. With its compact size and versatile features, the 1080P HD USB Camera is a must-have accessory for anyone looking to add high-quality video and image capture capabilities to their computer or single-board computer.
-
10F Capacitor
$14.17The 10F Capacitor is an electronic component used for storing electrical energy. It consists of two metal plates separated by a dielectric material, and is capable of storing and releasing electrical charge as needed. Capacitors are widely used in electronic circuits for filtering, decoupling, and smoothing signals, as well as for energy storage and power management. The 10F Capacitor is a high-capacity capacitor, meaning it is capable of storing a large amount of electrical charge. This makes it ideal for use in applications that require large amounts of energy storage, such as power supplies, energy-storage systems, and backup power systems.
-
1N4007 Rectifier Diode
$0.55The 1N4007 Rectifier Diode is a widely used component in electronic circuits for converting alternating current (AC) to direct current (DC). It consists of a semiconductor material with a P-N junction that acts as a one-way valve for electrical current, allowing current to flow in only one direction. The 1N4007 diode is rated for a peak reverse voltage of 1,000 volts (1kV) and a continuous forward current of 1 ampere (1A), making it suitable for use in a wide range of applications. The diode is widely used in power supplies, voltage regulators, rectifier circuits, and other applications where it is necessary to convert AC to DC.
-
1N4148 Logic Zener Diodes
$0.551N4148 Logic Zener Diodes are small, high-speed switching diodes that are widely used in digital and analog circuits. They are designed to regulate the voltage across a circuit and maintain a constant voltage, regardless of changes in current. The diodes are constructed with a Zener junction, which allows them to function as voltage regulators. Whether you’re building a digital or analog circuit, 1N4148 Logic Zener Diodes are a versatile and essential component for your project.
-
2-Pin Rocker Boat Switch
$1.64A 2-Pin Rocker Boat Switch is a switch used for turning electrical devices on and off. It is designed for use in boats and other harsh environments where water resistance is important. The switch has two pins for connecting to the power source and the device being controlled, and a rocker mechanism for manually turning the switch on and off. The switch is usually made of durable materials to withstand the harsh conditions of marine environments.
-
28BYJ-48 Stepper Motors
$4.36The 28BYJ-48 Stepper Motors are one of the most commonly used stepper motors. You can find this or similar motors in your DVD drives, Motion camera and many more similar devices. The motor has a 4 coil unipolar arrangement and each coil is rated for +5V hence it is relatively easy to control with any basic microcontrollers.
-
40 Pin 2.54mm 20mm Ling Header Pins Male
$2.18The 40 Pin 2.54mm 20mm Long Header Pins Male are a type of connector that are commonly used in electronics projects and DIY circuits. These header pins feature a 2.54mm spacing and a 20mm length, making them compatible with a wide range of printed circuit boards (PCBs) and breadboards. The header pins are made of high-quality, durable materials and are designed to provide a secure and reliable connection between the PCB and other components. They are typically sold in a strip of 40 pins and can be easily cut to the desired length for a specific project.
-
400 Pins Solder-less Breadboard
$4.36The 400 Pins Solder-less Breadboard is a compact and convenient prototyping platform for building and testing electronic circuits. It features a grid of 400 tie-points that allow you to quickly and easily connect components without the need for soldering. The breadboard has a compact design, making it easy to use and ideal for hobbyists, students, and professionals who need to build and test small to medium-sized circuits. The tie-points are clearly marked and color-coded, making it easy to identify the correct connections for your circuit. The breadboard also has a smooth surface and a sturdy construction, ensuring that your components and connections remain secure and in place during use.
-
830 Pins Solder-less Breadboard
$6.54The 830 Pins Solder-less Breadboard is a versatile and convenient prototyping platform for building and testing electronic circuits. It features a grid of 830 tie-points that allow you to quickly and easily connect components without the need for soldering. The breadboard has a compact design and is easy to use, making it ideal for hobbyists, students, and professionals who need to build and test electronic circuits. The tie-points are clearly marked and color-coded, making it easy to identify the correct connections for your circuit. The breadboard also has a smooth surface and a sturdy construction, ensuring that your components and connections remain secure and in place during use.
-
8×8 LED Matrix Display (Red)
$2.18The 8×8 LED Matrix Display (Red) is a compact and versatile display module that is widely used in a variety of electronic projects. It consists of 64 individual red LEDs arranged in an 8×8 matrix, and is capable of displaying a wide range of patterns, characters, and images. The display is compatible with a range of control signals and interfaces, making it easy to integrate into your electronic projects. The compact design and low power consumption of the 8×8 LED Matrix Display make it ideal for use in portable and battery-powered devices, such as handheld games, toys, and wearable electronics. Whether you need to display simple patterns, text, or even animations, the 8×8 LED Matrix Display (Red) provides a simple and effective solution for adding visual output to your electronic projects. -
9V Battery Plug for Arduino Boards
$1.31Great to use on LED strip light and take them anywhere. Also great for Arduino boards.
Note: 9V battery is not included here. -
Alligator Clips with Wire
$0.65Alligator clips (or Crocodile clips, if you prefer) is a sprung metal clip with long, serrated jaws, used attached to an electric cable for making a temporary connection to a battery or other component.
We sell individual alligator clips and it comes with wires.
-
Aluminium Heat Sink for Raspberry Pi
$1.96Raspberry Pi heat sink ensures that the board remains cool with no need for fans. This extends the life of Raspberry Pi and hence reduces hardware failure.
-
Antistatic Desoldering Gun 908-366A-F
$49.05The Antistatic Desoldering Gun 908-366A-F is a tool used in electronics repair and prototyping. It is designed to remove soldered components from printed circuit boards (PCBs) without damaging the surrounding components or the PCB itself. The 908-366A-F has an antistatic design to prevent damage to sensitive electronic components. The Antistatic Desoldering Gun 908-366A-F is an essential tool for electronic technicians and hobbyists, making it easier and more efficient to repair and prototype electronic circuits.
-
Arduino Mini USB Cable for Nano (50 cm)
$3.27The Arduino Mini USB Cable for Nano (50 cm) is a type of USB cable designed specifically for the Arduino Nano microcontroller board. It has a mini USB connector on one end and a standard USB connector on the other, allowing it to be connected to a computer or other USB device. The cable is 50 cm in length, providing ample reach for most projects and applications. It is made of high-quality materials and is designed to provide a stable and reliable connection between the Arduino Nano and the USB device.
-
Arduino USB Cable for UNO and Mega (50 cm)
$3.27The Arduino USB Cable for UNO and Mega (50 cm) is a type of USB cable designed specifically for the Arduino UNO and Mega microcontroller boards. It has a standard USB connector on one end and a type B USB connector on the other, allowing it to be connected to a computer or other USB device.
The cable is 50 cm in length, providing ample reach for most projects and applications. It is made of high-quality materials and is designed to provide a stable and reliable connection between the Arduino UNO or Mega and the USB device.
-
Battery Jack
$1.09The Battery Jack is a power connector designed for use with electronic devices such as single-board computers, development boards, and portable devices. It allows you to connect a battery to your device for portable, cord-free operation. The Battery Jack features a standard DC power jack that can be connected to a wide range of batteries, including rechargeable lithium-ion batteries and alkaline batteries. It is easy to install and use, and is designed to be compact and lightweight, making it ideal for use in portable devices. The Battery Jack provides a reliable and convenient power source for your electronic device, making it an essential accessory for anyone looking to use their device in a mobile or untethered environment.
-
Breadboard Trim Potentiometer – 10K
$1.64Breadboard trim potentiometer – 10K
These potentiometers are great for project prototyping. The three legs are spaced to fit perfectly in our range of solderless breadboards, giving each leg its own lane for hooking up to your microcontroller with jumper wires.
-
Ethernet Cable (1.5 meter)
$2.18- Exceed ANSI/TIA-568-D.2 Category 6 and ISO 11801 Class E Standards
- Up to 550MHz with 1G/10G-T Speed, Support PoE/PoE+/PoE++ (IEEE 802.3af/at/bt)
- Performance Tested with Fluke and Wired T568B
- Strain Relief and a Flexible Boot Simplify Moves, Additions and Changes
- Stranded Cable and RJ45 Modular Plugs with 50μ” Gold-plated Contacts
-
Use in Patch Panel or Equipment Connections in Enterprise Networks and Data CenterSupport Current and Future Category 6/5e/5 Applications
-
Female to Female 20cm 40P DuPont Color Jumper Wire
$4.36The Female to Female 20cm 40P DuPont Color Jumper Wire is a set of 40 wires that are commonly used in electronics projects and DIY circuits. These jumper wires feature a female connector on both ends and a 20cm length, making them suitable for use with a wide range of electronic components and printed circuit boards (PCBs).
The wires are made of high-quality materials and are designed to provide a secure and reliable connection between components. They are color-coded for easy identification and organization, allowing for quick and easy connections between components in a circuit.
-
Four-Channel Low Level Trigger Power 5V Relay Module
$10.90This four channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V signal and they are pre-soldered. A logic “LOW” to the control pin will turn the relay ON.
-
H-bridge Stepper Motor Dual DC Motor Driver Controller Board HG7881
$13.08The HG7881 H-Bridge Stepper Motor Dual DC Motor Driver Controller Board is a versatile motor control board designed to drive both stepper motors and DC motors. It uses an H-bridge configuration to control the direction and speed of the connected motors. The HG7881 is capable of driving motors that require up to 40 volts and 3 amps of current, making it suitable for a wide range of applications. It features a compact design, with a size of only 40 x 40 mm, and can be easily integrated into a variety of projects.
-
HDMI to HDMI Cable (1.5 meter)
$5.45The HDMI to HDMI Cable (1.5 meter) is a cable used to connect devices that support the HDMI (High-Definition Multimedia Interface) interface, such as Blu-ray players, gaming consoles, streaming devices, and computers. The cable has an HDMI connector on both ends and is 1.5 meters in length, providing ample reach for most applications. The HDMI to HDMI Cable provides a high-quality digital connection that allows for the transfer of audio and video signals between devices. It supports high-definition video resolutions up to 4K, as well as audio formats such as Dolby TrueHD and DTS-HD Master Audio. This means that users can enjoy high-quality video and audio from their connected devices.
-
Infrared LED Receiver Diode
$1.09The Infrared (IR) LED Receiver Diode is a small component that is used to detect and receive IR signals. It is designed to be low-cost, low-power, and compact, making it ideal for a wide range of projects and applications. The IR LED Receiver Diode consists of a small photodiode that is housed in a cylindrical package, with leads that are used to connect it to a circuit. When an IR beam is directed at the diode, it generates a small electrical current that can be processed by a microcontroller or other control unit.
-
L298N Dual Motor Controller
$9.81The L298N Dual Motor Controller is a dual H-bridge motor driver integrated circuit (IC) that is commonly used to control the speed and direction of two DC motors. It can handle motors that require up to 46 volts and 2 amps of current, making it suitable for a wide range of applications. The L298N features an on-board 5V regulator, which can be used to supply power to an external control circuit. It also has a set of control pins for each motor, allowing you to set the speed and direction of each motor independently.
-
Male to Female 20cm 40P DuPont Color Jumper Wire
$4.36The Male to Female 20cm 40P DuPont Color Jumper Wire is a set of 40 wires that are commonly used in electronics projects and DIY circuits. These jumper wires feature a male connector on one end and a female connector on the other, and a 20cm length, making them suitable for use with a wide range of electronic components and printed circuit boards (PCBs).
The wires are made of high-quality materials and are designed to provide a secure and reliable connection between components. They are color-coded for easy identification and organization, allowing for quick and easy connections between components in a circuit.
-
Male to Male 20cm 40P DuPont Color Jumper Wire
$4.36The Male to Male 20cm 40P DuPont Color Jumper Wire is a set of 40 wires that are commonly used in electronics projects and DIY circuits. These jumper wires feature a male connector on both ends and a 20cm length, making them suitable for use with a wide range of electronic components and printed circuit boards (PCBs).
The wires are made of high-quality materials and are designed to provide a secure and reliable connection between components. They are color-coded for easy identification and organization, allowing for quick and easy connections between components in a circuit.
-
Metal Push Button, Momentary (Self-reset), 3V, Green LED, Black Body
$2.73A Metal Push Button, Momentary (Self-reset), 3V, Green LED, Black Body is a tactile switch designed for momentary activation. It features a sturdy metal construction with a black body, providing durability and a sleek appearance. The button is equipped with a built-in green LED, which emits a vibrant green light when pressed. It operates at a voltage of 3V, making it suitable for various electronic applications. This push button is designed to automatically reset to its original position after being pressed, ensuring momentary activation and quick functionality.
-
Micro USB to USB-C Adapter
$2.18A Micro USB to USB-C Adapter is a small device that allows you to connect a Micro USB cable to a device with a USB-C port. This adapter converts the Micro USB plug into a USB-C plug, enabling you to use your older Micro USB cables with newer devices that use the more modern USB-C standard. This adapter is useful for those who have many Micro USB cables but are now using a device with a USB-C port, as it enables them to continue to use their existing cables without having to purchase new ones.
-
NPN Bipolar Transistor – 2N2222
$1.09The 2N2222 is a type of NPN bipolar transistor, a type of semiconductor device used as an amplifier or switch in electronic circuits. The 2N2222 has three pins: the collector, the base, and the emitter. When a voltage is applied to the base, it controls the flow of current between the collector and emitter. This allows the 2N2222 to act as a switch or amplifier in a circuit. The 2N2222 is a popular choice for electronic projects due to its low cost, ease of use, and versatility.
-
One Channel Relay
$5.45The One Channel relay module is suitable for SCM development, home appliance control. It is with 5V~12V TIL control signal which can control DC / AC signal. The module is perfect for common Arduino application. Useful to control a motor, a led strip, or any other module using Arduino. How to use it: Just connect a digital output of your Arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your Arduino.
-
Piezo Buzzer (Small)
$1.09The Piezo Buzzer (Small) is a compact and convenient audio signaling device that is widely used in a variety of electronic applications. It consists of a piezoelectric element that produces a high-pitched, audible tone when supplied with an electrical voltage. The buzzer is small and lightweight, making it ideal for use in portable and compact electronic devices. The buzzer features two wire leads for easy integration into your circuit, and is compatible with a wide range of voltages and frequencies, making it suitable for use in a variety of projects and applications.
-
Potentiometer
$2.18A potentiometer is a manually adjustable variable resistor with 3 terminals. Two of the terminals are connected to the opposite ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The potentiometer essentially functions as a variable resistance divider. The resistive element can be seen as two resistors in series (the total potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. If a reference voltage is applied across the end terminals, the position of the wiper determines the output voltage of the potentiometer.
-
Push Button Switch [12mmx12mm]
$0.55The 12mmx12mm Push Button Switch is a compact, momentary switch designed for use in a wide range of electronic applications. It features a 12mm x 12mm body and a smooth, easy-to-press button that provides a satisfying tactile response. The switch is designed for easy installation and features two solder lugs for connecting to your circuit. The switch is suitable for a wide range of voltages and currents, making it ideal for use in a variety of electronic projects, including control panels, toys, and consumer electronics. The 12mmx12mm Push Button Switch is a reliable and durable switch that provides a simple and convenient way to add input controls to your electronic projects.
-
Raspberry Pi 4 Aluminum Heatsink Case
$16.35It is not an enclosure or case, it should be called heatsink because the case itself is CNC aluminum and comes with thermal paste/tape to effectively dissipate heat generated from the processor, RAM IC. Furthermore, it is also integrated with two cooling fans (assembled, but not fasten to the case), just connect the power to run it. Please note that its Just the casing only (Without Raspberry Pi) The heatsink is only for Raspberry Pi 4 usage.
-
RGB 5mm LED
$0.87The 5mm LED (Light Emitting Diode) is a compact and efficient light source that is widely used in a variety of electronic projects. It consists of a small, transparent package that houses a semiconductor chip that emits light when a current is passed through it. The 5mm LED is compact and lightweight, making it ideal for use in small and portable devices, and its low power consumption makes it suitable for use in battery-powered applications. The LED is available in a range of colors, including red, green, blue, yellow and white, and is compatible with a variety of voltage and current levels, making it easy to integrate into your electronic projects.
